1. Prepare the Appliance:

   • Ensure the appliance is placed on a flat surface.
   • Remove the main unit and fill the carafe with fresh, room temperature water (filtered water is recommended for best brewing results).
   • Note: Do not exceed the maximum water level indicated on the carafe.
   • Important: Always use room temperature water when brewing. Never use hot water (water hotter than 140°F/60°C). Problems caused by using hot water are not covered under the warranty.
   • Tip: Water makes up over 99% of brewed coffee. For optimal flavor, use fresh filtered water.

2. Add Coffee Grounds:

   • Unscrew the filter basket from the flow & air chamber.
   • Using the included scoop, add approximately 7 level scoops (45g) of ground coffee into the filter basket.
   • Note: Never exceed the maximum fill line on the basket.
   • Note: Avoid overpacking or overfilling the coffee. Adjust the amount based on your desired brew ratio and taste preferences.

3. Assemble the Filter Basket:

   • Reattach the filled filter basket to the flow & air chamber by turning it clockwise until secured and no longer spinning.

4. Assemble the Device:

   • Place the assembled main unit onto the filled carafe, ensuring the filter basket is fully submerged in the water.

5. Start Brewing:

   • Press the power button once for a 15-minute brew.
   • Press the power button twice for a 30-minute brew (bolder).
   • Pressing the button during operation will stop the appliance.

6. Brewing Process:

   • Within seconds, the water will begin circulating for extraction.
   • The power button will illuminate blue during brewing and turn off when complete.

7. Post-Brewing:

   • After brewing, partially lift the main unit from the carafe.

8. Serve or Store:

   • Place the airtight lid on the carafe. Your cold brew is now ready to serve, refrigerate, or take with you.

For any inquiries or assistance, please contact Homtone's official customer service email at cs@homtone.com.