1. AIRY FROTH MILK

Operating Method

Pour 300ml of milk into the cup, then press the button to turn it on. Press the button once, and the will blink three times as the machine starts working. The motor will run fol 100 to 300 seconds before stopping; when it does, the buzzer will beep for 1 second. signaling that the frothing process is complete. The milk-froth ratio will be lower than that of the"Dense Froth Milk" function and the milk temperature will be between 140°F and 158°F(60C and 70°C).

Attention

Maximum milk volume is 300 ml.

2.DENSE FROTH MILK

Pour 300ml of milk into the cup, then press the button to turn it on. Press the button twice, and the will blink three times as the machine starts working. The motor will run for 100 to 300 seconds before stopping; when it does, the buzzer will beep for 1 second signaling that the frothing process is complete. The milk-froth ratio is at least 70% and the milk temperature will be between 140°Fand 158°F(60C and 70°C)

Attention

Maximum milk volume is 300 ml.

3.HOT MILK

Pour 600ml of milk into the cup, then press the button to turn it on. Press the button three times. and the will blink three times as the machine starts working. The motor will run for 250 to 400 seconds before stopping; when it does, the buzzer will beep for 1 second, signaling that the frothing process is complete.The milk temperature will be between 140°Fand 158F(60Cand 70C).

Attention

Maximum milk volume is 600 ml.

4.CHOCOLATE MILK

Pour 600ml of milk and 30g chocolate beans into the cup, then press the button to turn,it on. Press the button four times, and the will blink three times as the machine starts working. The motor will run for 350 to 550 seconds before stopping; when it does, the buzzer will beep for 1 second, signaling that the frothing process is complete. The milk temperature will be between 158°F and 176°F (70°C and 80C).

Attention

Maximum milk volume is 600 ml.

5.COLD FROTH MILK

Pour 300ml of milk into the cup, then press the button to turn it on. Press the button five times, and the will blink three times as the machine starts working. The motor will run for (120+5) seconds before stopping; when it does.the buzzer will beep for 1 second, signaling that the frothing process is complete. The milk-foam ratio is at least 70%

Attention

Maximum milk volume is 300 ml.

Notes:
1. When you press any key on the control panel, the buzzer will beep (for 0.2 seconds).
2. When this machine works in any mode with the heating function with a minimum capacity of 120m( MIN) pure milk, both the milk temperature values and the corresponding time values will be not within the above ranges; in such cases, the milk temperature values and the correspond- ing time values are not judged.
Warning:
DO NOT remove the lid while the frothing paddle is running to avoid risk of electric shock, injury, or damage.